AutoPot ™ Connectors

Straight connector is simply used to connect two pieces of 1/4″ pipe together.

Straight connector is simply used to connect two pieces of (1/2") pipe together

Is used to extend your system if you are using 1/4″ pipe. They are inserted in-line at a point adjacent to an AQUAvalve.

Is simply used to connect three pieces of 1/2” pipe together

These connectors are perfect for reducing 1/2″ pipe down to 1/4″ pipe, when using large systems. They are inserted in-line at a point adjacent to an AQUAvalve. They provide a water tight connection unlike many other types of reduction fittings. They work in exactly the same way as the 1/2″ to 1/4″ cross connector but this fitting has one connection for 1/4″ pipe whereas the cross connector provides two connections for 1/4″ pipe (6-16mm)

Cross Connector used to connect four pieces of pipe together, they are useful along with the 1/4” Tee Connectors as they provide the user with the ability to create a layout to suit his or her needs

Cross Connector used to connect four pieces of pipe together, they are useful along with the 1/2” Tee Connectors as they provide the user with the ability to create a layout to suit his or her needs

These connectors are perfect for reducing 1/2″ pipe down to 1/4″ pipe, when using large systems. They are inserted in-line at a point adjacent to an AQUAvalve. They provide a water tight connection unlike many other types of reduction fittings.

These connectors are perfect for reducing 1/2″ pipe down to 1/4″ pipe, when using large systems. They are inserted in-line at a point adjacent to an AQUAvalve. They provide a water tight connection unlike many other types of reduction fittings.

in-line taps are a very useful accessory. They can be added to the end of a layout when you are using 1/2″ pipe. You can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks

in-line taps are a very useful accessory. They can be inserted in-line just after the connection to the 12.4 gallon solid reservoir. This allows you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

To close the end of an 6mm (1/4") water pipe.

To close the end of an 16mm (1/2") water pipe.

Fitting for (1/2") Hose Pipe